Kessel-Untergrundentwässerungslösungen

Kessel Polypropylene Drainage Solutions

A. Introduction

EGIC produces push-to-fit drainage system made of polypropylene. This range of pipes, fittings and floor drains ensures ease of assembly and installation due to special seal plugs that tightly grip the pipes when they are inserted into the fitting sockets. The Pipes are made of polypropylene (PP) hot water resistant and they have also stabilized light sensitivity. Our range has sizes starting from 50mm – 160mm with an average Pipes Length 3 meters straight length and they stand out with the Color Grey RAL 7037.

B. The Advantages of Kessel Push-Fit Drainage System are:

The speed of making a connection with push-fit fittings where user can quickly cap or repair
Push-fit fittings are available in various sizes for different kinds of applications
Push-fit fittings are easily removed so they can be repositioned as needed without specialized tools
Plastic pipe with light weight, high flexibility, anti-leakage and chemical resistant

C. Installation Tips

Pipes, fittings and floor drains are connected by push-fit sockets and sealed tight with sealing ring.
Pipes can be easily cut to fit any length, chamfered and burned, connected and fixed in position.
In horizontal lines, the spacing of pipe clamps must not be more than ten times the outer diameter of the pipe. In vertical lines, spacing should not more than 1 meter (maximum 2 meters)
If the floor is covered with asphalt mastic, exposed pipe should be protected with heat-insulating material.
When Kessel pipes are laid in concrete, the socket gaps should be sealed with adhesive tape in order to prevent penetration of cement grout.

Push-fit Underground Drainage Solution:

EGIC produces the underground push-fit drainage system made of polypropylene to prevent the excess load of structures placed above the underground system. EGIC re-invented the sizes of the pipes and fittings to range from 160-200 mm. Our underground fittings include four internal ribs on both sides to tolerate heavy loads up to 4 KN/m2 and prevent dust from penetrating the drainage system.

The advantages of push-fit Underground Drainage Solution:

Higher flexibility to tolerate ground movements and heavy loads up to 4 KN/m2 without damage
Effectively perform under high temperature that may reach 95°C
Prevent dust from penetrating the drainage system
Fully anti-leakage system and chemical resistant
Easier to fit, install and repair than alternative materials that need solvent-gluing

Kessel Drains with Style

KESSEL products are manufactured by EGIC according to the highest standards to perform their flawless drainage task. These aspects have made Kessel collection the top choice for bathrooms, Shower Drains, kitchens, shower cabinets, spas, roofs and, fitness centers.

KESSEL Shower Drains are made of ABS material including sealed O-ring and a flexible body to be adjusted according to the ceramic height.

The covers withstand up to 300 Kg and can be easily installed facing up or reversed to offer tile surface. The finely channel stainless steel surface results in the visual interplay between the shimmering matt and glossy surface.

Complete Home Solutions Filter

sitemap

products

services

newsroom

find us

Kessel Drains with Style

Welcome to

EGIC EGYPT

EGIC Worldwide