Smart Home

PIPE PVC-U

Dn L (m) S (mm) D (mm) Kg
32 6 1.8 32 0.287
32 6 2.4 32 0.364
3/4 6 2.9   0.36
1" 6 1.8 1 0.297
1" 6 2.4 1 0.374
48 6 2.5 48 0.582
48 6 3.7 48 0.819
50 6 2.5 50 0.618
50 6 3.7 50 0.871
60 6 2.7 60 0.796
60 6 3.9 60 1.109
63 6 1.9 63 0.608
63 6 3 63 0.919
75 6 3 75 1.103
75 6 4 75 1.414
75 6 5 75 1.724
90 6 3 90 1.333
110 6 2.8 110 1.542
110 6 3 110 1.623
110 6 4 110 2.111
110 6 5 110 2.567
160 6 4 160 3.130
160 6 5 160 3.909

PIPE PVC-U

Dn L (m) S (mm) D (mm) Kg
32 6 1.8 32 0.287
32 6 2.4 32 0.364
1" 6 1.8 1 0.297
1" 6 2.4 1 0.374
48 6 2.5 48 0.582
48 6 3.7 48 0.819
50 6 2.5 50 0.618
50 6 3.7 50 0.871
60 6 2.7 60 0.796
60 6 3.9 60 1.109
63 6 1.9 63 0.608
63 6 3 63 0.919
75 6 3 75 1.103
75 6 4 75 1.414
75 6 5 75 1.724
90 6 3 90 1.333
110 6 2.8 110 1.542
110 6 3 110 1.623
110 6 4 110 2.111
110 6 5 110 2.567
160 6 4 160 3.130
160 6 5 160 3.909

ML Pipes PVC

Dn L (m) S (mm) D (mm) Kg
75 6 3 75 1.067
75 6 4 75 1.381
110 6 4 110 1.61
110 6 5 110 2.114
110 6 5   2.575
160 6 4 160 3.034
160 6 5 160 3.733

 

ML Pipes PVC

Dn L (m) S (mm) D (mm) Kg
75 6 3 75 1.103
75 6 4 75 1.414
110 6 4 110 2.111
110 6 5 110 2.567
160 6 4 160 3.130
160 6 5 160 3.909

Elbow 87.5°

Dn L (mm) H (mm) S (mm) Kg
32 70 22 4 0.040
1(Inch) 43 21 3.5 0.050
48 72 30 4 0.110
50 83 33 4 0.100
60 92 35 4 0.180
63 105 32 4 0.143
75 109 40 4 0.290
90 143.5 42 4.5 0.313
110 147 45 6 0.680
160 208 70 6 1.490

Short Cross 87.5° / Reducer
Short Cross 87.5° / Reducer
D1 D2 L H S C1 C2 Kg
90 63 94.5 42 2.7 187 189 0.415
110 48 104 48 3.7 216 208 0.675
110 50 103 48 3.6 216 207 0.670
110 60 112 48 4.2 216 225 0.695
110 63 112 48 3.9 216 225 0.690
110 75 112.5 48 4.2 216 225 0.690
110 90 113 48 4.9 216 226 0.710

 

Cross 87.5° / Reducer

D1 D2 L H S C1 C2 Kg
110 50 107 47 5.5 200 214 0.720
110 60 105 47 5.5 200 214.5 0.730
110 75 114 47 5.5 200 255 0.875

Elbow 45° with expansion Joint

Elbow 45° with expansion Joint
DN L H S kg
110 100 45 4.3 0.465

Short tee 87.5° with access door

short tee with access door
Dn1 Dn2 H1 H2 C L S1 S2 kg
110 48 48 32 216 104 5.7 3.7  
110 60 48 36 216 112 5.7 4.2 0.74
110 75 48 40 216 112 5.7 4.2 0.815
110 110 48 48 216 113 5.7 5.7 0.915

Elbow 45°

Elbow45
Dn L (m) H (mm) S (mm) Kg
32 49 22 4 0.032
3/4 30 30 2.9 0.024
1 (Inch) 22.2 49 3.5 0.040
48 50 30 4 0.080
50 52 33 4 0.070
60 61 35 4 0.110
63 60 32 4 0.115
75 70 40 4 0.180
90 81 42 4.5 0.235
110 93 45 5.5 0.390
160 140 70 6 0.921

Elbow 87.5° with Access Door

Elbow 87.5° with Access Door
Dn L H S Door Kg
60 91 85 4 75 0.242
75 109 40 4.5 75 0.355
110 145 45 6 110 0.675
160 209 70 6 110 1.490

Tee 87.5°

D L H S C Kg
32 58 22 3 95 0.070
1(Inch) 58 22.1 3.5 95 0.080
48 71 30 4 127 0.150
50 78 32 4 140 0.140
60 86 35 4 153 0.226
63 71 32 4 139 0.200
75 100 40 4.5 189 0.365
90 95 42 4.5 187.5 0.425
110 142 45 6 243 0.933
160 346 70 6 345 1.885

Tee 87.5° / Reducer

D1 D2 H1 H2 C L S1 S2 Kg
75 60 40 34 167 96 4.5 4 0.300
110 50 46 33 200 103 6 5.5 0.670
110 60 45 36 180 105 6 4.5 0.632
110 75 45 40 196 121 6 4 0.680
160 110 71 45 288 169 6 6 1.420

Tee 45°

D L H S C Kg
32 47 21 3.5 90 0.072
3/4 48 18.3 2.9 84 0.043
1 (Inch) 48 22.65 3.5 95 0.080
48 86 30 4 142 0.170
50 95 32 4 153 0.150
60 103 35 4 165 0.279
63 112 33.6 4 177.5 0.275
75 128 40 4.5 202 0.414
90 153 43.7 4.5 238 0.600
110 182 45 6 281 1.100
160 250 71 6 390 2.565

Tee 45° / Reducer

D1 D2 H1 H2 C L S1 S2 Kg
50 110 47 36 240 132 5.5 4 0.680
60 110 45 37 222 140 6 4 0.740
75 110 46 40 260 155 6 5 0.910
160 110 71 45 320 230 6 6 1.920

Cross 110 / 45 degree

D L H S C1 C2 Kg
110 145 51.3 6.5 281 367.8 1.560

Cross 87.5 degree

D L H S C1 C2 Kg
75 104 46 4.5 189 207 0.500
110 145 45 6.5 293 245 1.326

Cross 87.5° / Reducer
D1 D2 L H S C1 C2 Kg
90 63 94.5 42 2.7 187 189 0.415
110 48 104 48 3.7 216 208 0.675
110 50 103 48 3.6 216 207 0.670
110 60 112 48 4.2 216 225 0.695
110 63 112 48 3.9 216 225 0.690
110 75 112.5 48 4.2 216 225 0.690
110 90 113 48 4.9 216 226 0.710

 

Cross 87.5° / Reducer

D1 D2 L H S C1 C2 Kg
110 50 107 47 5.5 200 214 0.720
110 60 105 47 5.5 200 214.5 0.730
110 75 114 47 5.5 200 255 0.875

Cross 45° / Reducer

D1 D2 L H S C1 C2 Kg
110 50 112 47 5.5 240 265 0.755
110 60 115.5 47 5.5 240 279 0.805
110 75 126 47 5.5 240 312 0.890

Tee 87.5◦ / reducer with Access Door

D1 D2 H1 H2 C L S1 S2 Kg
75 60 40 35 65 96 4.5 4 0.365
110 60 45 35 185 107 6 5 0.710
110 75 45 36 199 122 6 6 0.745
160 110 71 45 288 214 6 6 1.505

 

Tee 87.5° with Access Door

Dn L H S C Kg
60 86 36 145 4 0.301
75 100 40 189 4.5 0.441
110 141 45 242 6 0.920
160 203 71 345 6 2.000

Drainage collection

Dn D1 D2 L H S C Kg
110 50 63 95.5 55 5 186.18 0.670
110 48 48 95.5 55 5 186.18 0.660
110 60 60 95.5 55 5 186.18 0.706

Drainage plug

Dn L H S Kg
48 28 24 3 0.026
50 28.5 25 3 0.030
60 29 25 3.5 0.035
63 35 30 5 0.04
75 69 65 4.5 0.05
110 111 40 3.5 0.140
160 43 38 5 0.23

Air Vent

Dn L H S Kg
60 88 35 3 0.060
75 102 46 3 0.090
110 102 52 4 0.165

Elbow with Inner Thread 87.5°

Dn Thread H S C Kg
48 1.25" 30 4 59 0.120
48 1.5" 30 4 58 0.110
50 1.25" 30 4 58 0.110
50 1.5" 30 4 58 0.100

Reducing Brush

Type D1 D2 H1 H2 L Kg
IV 90 3" 38 38 100 0.116
III 3/4" 1" 22 22 25 0.012
III 3/4" 32 22 22 25 0.01
III 48 32 31 29 38 0.039
III 48 1" 31 29 38 0.035
III 50 48 33 28 43 0.010
III 60 48 36 30 45 0.060
III 75 48 38 33 48 0.125
II 75 50 40 36 50 0.110
II 75 60 42 38 52 0.110
II 110 50 46 38 58 0.250
II 110 60 50 38 61 0.260
I 3" 75 56 56 66 0.167
I 110 75 50 38 61 0.266
I 110 114 36 34 40 0.060
I 160 110 65 56 77 0.533

Eccentric Reducer

D d H I L Kg
90 50 43.5 30 117 0.158
90 60 43.5 33 117 0.167
90 63 43.5 33 117 0.170
90 75 43.5 38 117 0.180
110 48 53 30 132 0.205
110 50 54 38 132 0.235
110 60 54 38 132 0.240
110 63 54 38 132 0.245
110 75 54 40 132 0.276
110 90 54 46 132 0.278
160 110 67 48 167 0.500

Cleaning Insert with Access Door
Dn L H S Door Kg
50 72 38 3.6 65 0.098
60 86 43 4 75 0.125
63 65 40 3.6 75 0.113
75 100 50 4.5 75 0.145
90 82 43 4.5 75 0.166
110 89 50 5 110 0.322
160 125 78 6 110 0.607

Socket

D L H S Kg
32 48 22 3 0.030
3/4 39 18.3 2.9 0.016
1 (Inch) 48 22 3 0.028
48 65 31 4 0.060
50 72 36 4 0.050
60 80 40 4 0.090
63 66.5 32 4 0.080
75 94 45 4.5 0.150
90 87 42 4.5 0.166
110 109 52 5.5 0.330
160 145.5 70 6 0.650
Socket
D L H S Kg
32 48 22 3 0.030
1 (Inch) 48 22 3 0.028
48 65 31 4 0.060
50 72 36 4 0.050
60 80 40 4 0.090
63 66.5 32 4 0.080
75 94 45 4.5 0.150
90 87 42 4.5 0.166
110 109 52 5.5 0.330
160 145.5 70 6 0.650

Socket with Inner Thread
Dn Thread L H Kg
48 1.5" 100 85 0.076
Socket with Inner Thread
Dn Thread L H Kg
48 1.5" 100 85 0.076

Siphon

Dn L H S C Kg
50 100 30 3 170 0.165
75 150 39 4.3 240 0.467
110 45 45 6 305 1.218

Expansion Joint

L D1 D2 S Kg
30 75 85 4 0.090
30 110 122.5 4 0.180
38 161 180 7.5 0.323

Repairing Socket with expansion Joint

D H S Kg
75 82 4 0.335
110 142 5 0.685
160 175 5 0.705

Short Elbow 87.5°

Dn L H S Kg
3/4 50 18.3 2.9 0.024
48 91 32 4 0.105
50 91 32 3 0.090
60 109 36 4 0.160
75 125 40 4 0.220
110 114 50 6 0.683

 

Short Elbow 87.5° with Access Door

D L H S Door Kg
110 114 50 5.5 100 0.685

Repairing Socket

Repairing Socket
D H S Kg
160 145.5 5 0.645

Short Cross 87.5°
Short Cross 87.5°
Dn L H S C1 C2 Kg
60 71 35 4.2 139 142 0.250
63 71 35 2.7 139 142 0.195
90 95 42 4.5 187 190 0.500
110 112 48 5.7 216 225 0.870
160 158 68 6 305 316 1.860

 

Eccentric Reducer with gasket

Eccentric Reducer with gasket
D d H I L Kg
63 50 44 46 115 0.095
60 50 44 46 112 0.09

Short Tee 87.5°
Short Tee 87.5°
Dn L H S C Kg
3/4 33 18.3 2.9 65 0.033
110 112 48 5.7 216 0.76

 

Cross 87.5° / Reducer

D1 D2 L H S C1 C2 Kg
110 50 107 47 5.5 200 214 0.720
110 60 105 47 5.5 200 214.5 0.730
110 75 114 47 5.5 200 255 0.875

Short Tee 87.5° / Reducer
Short Tee 87.5° / Reducer
Dn1 Dn2 H1 H2 C L S1 S2 Kg
110 48 48 32 216 140 5.7 3.7 0.675
110 50 48 30 216 103 5.7 3.6 0.67
110 60 48 36 216 112 5.7 4.2 0.695
110 63 48 36 216 112 5.7 3.9 0.69
110 75 48 40 216 112.5 5.7 4.2 0.69
110 90 48 42 216 113 5.7 4.5 0.71

 

Cross 87.5° / Reducer

D1 D2 L H S C1 C2 Kg
110 50 107 47 5.5 200 214 0.720
110 60 105 47 5.5 200 214.5 0.730
110 75 114 47 5.5 200 255 0.875

Pipe Plug

Pipe Plug
Dn H S Kg
32 21.5 2.3 0.01
3/4 18.3 2 0.009
1 " 21.5 2.3 0.013
48 24 2.3 0.024
50 26 2.3 0.022
60 30 3 0.038
75 35.5 3 0.05
160 51.5 3 0.195

Side Cross

Side Cross
Dn1/Dn2 B C1 C2 C3 S H L Kg
110 87.5° 216 188 188 5.6 45 127 0.935

Closed Cover
  L A B Kg
Closed 192 56 182 0.280

Rain drain with cover

Rain drain with cover
Dn L X Y M N S Kg
75 154 164 157 45 194 4 0.630
110 154 164 157 45 194 4 0.530

Open Cover

open cover
  L A B Kg
Open 192 56 182 0.270

Open Cover

  L A B Kg
Open 192 56 182 0.270

Floor Drain Extension
D H L C S Kg
110 17 93 150 4 0.270
125 17 99 200 4 0.390

Floor drain
D in D out C1 C2 L1 L2 S2 Kg
48 75 125 110 193 170 4 0.450
48 60 125 110 180 170 4 0.425
60 75 125 110 193 180 4 0.470
60 60 125 110 193 180 4 0.465
50 75 125 110 220 180 4 0.430
48/60 75 130 120 197 185 4 0.570
50 60 125 110 195 180 4 0.400
110 110 201 200 280 280 5 1.500
110 160 170 160 240 240 5 0.800

Drain 7 cm
D in D out C1 C2 L1 L2 S2 Kg
48 60 117 110 200 175 5 0.370

Drain 8.8 Cm
D in D out C1 C2 L1 S Kg
75 60 111.5 108 220 4.5 0.475
Drain 8.8 Cm
D in D out C1 C2 L1 S Kg
75 60 111.5 108 220 4.5 0.475

Small Drain

L1 L2 L3 D D1 D2 D3 X S Kg
84 145 115 48 87 77 40 115 7 0.230

floor drain with odor trap
Floor Drain with oder trap
D in D out C1 C2 L1 L2 S Kg
48 60 125 110 191 60 4 0.54
48 75 125 110 196 180 4 0.575
60 60 125 110 195 170 4 0.570
60 75 125 110 200 180 4 0.700
63 90 125 110 211 180 3 0.545

Inspecting Chamber Ø500mm
  • Advantages 1. Highest drainage rate 300 liters/minute.
  •  Body made of PPR for more flexibility and non-breakage.
  •  ABS cover bottom-reinforced for more sollidity.
  •  1×160 mm input, 4×110 mm inputs, 1×160 mm output.
  •  Maximum load 1500 KG.
  •  Chamber height control through 20 cm extension.
  •  Composed of 3 pieces assembled as males and females, silicon is preferred for assembling for tight close.
Inspecting Chamber

Advantages 1. Highest drainage rate 300 liters/minute. 2. Body made of PPR for more flexibility and non-breakage. 3. ABS cover bottom-reinforced for more sollidity. 4. 1×160 mm input, 4×110 mm inputs, 1×160 mm output. 5. Maximum load 1500 KG. 6. Chamber height control through 20 cm extension. 7. Composed of 3 pieces assembled as males and females, silicon is preferred for assembling for tight close.

Floor / Cellar Drains

Cellar drain “Universal”, made from PP Φ 110 outlet
With vertically adjustable upper section ( 18 mm )
27 611 : 250 x 250 mm. slotted or closed plastic grill 1 Φ 110 inlet and 2 Φ 75 inlets.
Lateral Φ 110 outlet at 2.5° slope, discharge 1.8 litre / s 300 kg load class grill.
Integral odour trap, sludge basket and triple inlet flow plugs.

Advantages
Upper section rotatable, tiltable and vertically adjustable up to 18 mm.
Available with vertical extension and optional components.
Easy access for cleaning and maintenance.

Floor / Cellar Drains

Cellar drain “Universal”, made from PP Φ 110 outlet
With vertically adjustable upper section ( 18 mm )
27 611 : 250 x 250 mm. slotted or closed plastic grill 1 Φ 110 inlet and 2 Φ 75 inlets.
Lateral Φ 110 outlet at 2.5° slope, discharge 1.8 litre / s 300 kg load class grill.
Integral odour trap, sludge basket and triple inlet flow plugs.

Advantages
Upper section rotatable, tiltable and vertically adjustable up to 18 mm.
Available with vertical extension and optional components.
Easy access for cleaning and maintenance.

Area drain

Area drain
Φ 110 outlet
With vertically adjustable upper section ( 18 mm )
27 611 : 250 x 250 mm. slotted or closed plastic grill 1 Φ 110 inlet
Lateral Φ 110 out at 2.5° slope, discharge 1.8 litre / s Integral odour trap.

Advantages
Upper section rotatable, tiltable and vertically adjustable up to 18 mm and made from PP.
Available with vertical extension and optional components.
Easy access for cleaning and maintenance.

Area drain

Area drain
Φ 110 outlet
With vertically adjustable upper section ( 18 mm )
27 611 : 250 x 250 mm. slotted or closed plastic grill 1 Φ 110 inlet
Lateral Φ 110 out at 2.5° slope, discharge 1.8 litre / s Integral odour trap.

Advantages
Upper section rotatable, tiltable and vertically adjustable up to 18 mm and made from PP.
Available with vertical extension and optional components.
Easy access for cleaning and maintenance.

Inspection Chamber Ø600mm
  • Smart Home New Polypropylene inspection chamber
  • Excellent resistance for aggressive waste water
  • Three 160mm socket-pipe inlets and one 160mm pipe outlet
  • Coming with 410mm height PP vertical extension section contains 5 steps allow height extending or trimming by 69mm (cutting lines are marked by CUT HERE)
  • Available with 285mm optional vertical extension having 2 extra 110mm inlet PP socket-pipes installed at any desired depth above the main body
  • 60cm x 60cm strong PP cover able to withstand up to 2 Tons of static load, and attached with stainless steel loose handles for easier removing
  • Having a free volume flow rate of 2500 liter/min
Inspection Chamber Ø600mm
  • Smart Home New Polypropylene inspection chamber
  • Excellent resistance for aggressive waste water
  • Three 160mm socket-pipe inlets and one 160mm pipe outlet
  • Coming with 410mm height PP vertical extension section contains 5 steps allow height extending or trimming by 69mm (cutting lines are marked by CUT HERE)
  • Available with 285mm optional vertical extension having 2 extra 110mm inlet PP socket-pipes installed at any desired depth above the main body
  • 60cm x 60cm strong PP cover able to withstand up to 2 Tons of static load, and attached with stainless steel loose handles for easier removing
  • Having a free volume flow rate of 2500 liter/min

Drainage Water Channel
Drainage Water Channel

Drainage Water Channel:

  • Smart Home New reinforced Polypropylene drainage water channel constructed for underground installation with 20cm width, 20cm depth and 1m Length.
  • Excellent resistance for aggressive waste water.
  • Four optional lateral pipes outlets, Ø110mm at each side, and Ø50mm at each side.
  • One optional bottom outlet Ø75mm.
  • Designed for easily attachment at both ends for extending purposes either in longitudinal or transversal directions.
  • Every unit contains 5 optional cutting steps allow length trimming by 10cm for each step (cutting lines are marked by CUT HERE).
  • Strong PP cover able to withstand up to 2 Tons of static load.
  • Designed to be anchored to set the location before final fixation.
  • Having a free volume flow rate up to 500 liter/min.
Area drain

Area drain
Φ 110 outlet
With vertically adjustable upper section ( 18 mm )
27 611 : 250 x 250 mm. slotted or closed plastic grill 1 Φ 110 inlet
Lateral Φ 110 out at 2.5° slope, discharge 1.8 litre / s Integral odour trap.

Advantages
Upper section rotatable, tiltable and vertically adjustable up to 18 mm and made from PP.
Available with vertical extension and optional components.
Easy access for cleaning and maintenance.

Introduction

EGIC’s Smart Home PVC-U drainage solution is one of the most comprehensive drainage system in the market with full range from 32mm to 160mm. Smart Home pipes and fittings are made of Un-plasticized Polyvinyl Chloride, mainly used for non-pressure bilge lines. It has a light weight to prevent damages during handling and installation, withstand high temperatures and has high chemical resistance. All parts assemble easily using cement solvent to accommodate thermal or ground movement.

Pipes and Fitting are manufactured according to ES1717, ISO 4435, DIN19534, DIN EN1401, DIN EN1329, DIN 80618062, ISO 3633, ASTM D3311 and ASTM D2665 Standards to ensure reliability and long-lasting service.

EGIC has also developed the PVC multi-layer pipes that obscure sound and managed to manufacture outdoor solutions that have a high flowrate, such as inspection chambers, water channels and gully traps with easy access for cleaning and maintenance that may be used if unexpected blockage occurs.

Area of application:

  • Wastewater pipe lines inside/outside constructions
  • Main drainage lines, air-conditioning units
  • Disposal of irrigation/rainwater and wastewater

Features of Smart Home – PVC Drainage System are:

  • Long-term durability to survive in high temperatures 60°C
  • Complete drainage solution includes all pipes, fittings, floor drains, gully traps, water channels and inspection chambers.
  • Fittings may include a wide inspection door to facilitate the maintenance process if needed.
  • Smooth surface that assures low friction loss and high flow
  • Light weight, easy to transport, handle and install.  
  • Longest installing distance of pipes in fittings, reduces the number of joints and fewer the opportunities of leakage